Knowledge Hub

Industrial Insights

Latest updates on combustion technology, emission regulations, and engineering case studies from Heatflam experts.

Jul 21, 2026 2 months ago

Industrial Drying Combustion Systems for Children’s Furniture Factories

TL;DR: Heatflam configured a natural-gas industrial drying combustion system for a children’s furniture factory drying line in China. The supplied…

Read Article

Blogs

Jul 20, 2026 2 months ago

Industrial Drying Combustion Systems

TL;DR: Heatflam supplies custom industrial drying combustion systems for automotive paint-drying and related thermal processes. The supplied China project references…

Read Article

Blogs

Jul 17, 2026 2 months ago

Burner Retrofit for Old Industrial Boilers: When to Upgrade Instead of Replace

TL;DR: A burner retrofit can extend an old boiler’s useful life when pressure parts are sound and a combustion test…

Read Article

Blogs

Jul 16, 2026 2 months ago

Industrial Burner Unstable Flame: How to Diagnose Air-Fuel Ratio and Draft Problems

TL;DR: An industrial burner unstable flame is usually a control-and-flow problem before it is a replacement problem. Verify fuel pressure,…

Read Article

Blogs

Jul 15, 2026 2 months ago

Industrial Burner Low Heat Output: Causes from Fuel Supply, Airflow and Control Settings

TL;DR: Industrial burner low heat output usually traces to restricted fuel flow, incorrect combustion air, undersized burner capacity, or temperature-control…

Read Article

Blogs

Jul 14, 2026 2 months ago

Industrial Burner Lights Then Shuts Off: Common Causes and Fixes

TL;DR: When an industrial burner ignites and immediately stops, the safeguard has usually failed to prove flame, lost the signal…

Read Article

Blogs

Jul 13, 2026 2 months ago

Ignition Electrodes and Ionization Probes: Common Burner Failure Points

TL;DR: Ignition electrodes create the spark; ionization probes verify that flame is established. Reliable diagnosis depends on measured spark geometry,…

Read Article

Blogs

Jul 10, 2026 2 months ago

Industrial Burner Systems for Boilers: Selection, Control and Safety

TL;DR: A boiler burner system should be selected around the real load profile, boiler geometry, available fuel, emissions permit, control…

Read Article

Blogs

Jul 09, 2026 2 months ago

Direct-Fired vs. Indirect-Fired Hot Air Heaters: Which One Should You Choose?

Direct-Fired vs. Indirect-Fired Hot Air Heaters: Which One Should You Choose? TL;DR: Choose a direct fired hot air heater when…

Read Article

Stay Ahead of the Curve

Subscribe to our engineering newsletter for deep dives into combustion efficiency, new regulations, and technical case studies.