Heatflam / Technical Resources
Combustion
News & Insights
Explore articles on industrial combustion, burner selection and thermal process applications.
Technical reading for your next combustion project.
Explore the articles ↓Latest Articles
91 published articles
ARCHIVE / 02
Industrial Combustion System for Fish Feed Drying
TL;DR: Specify an industrial combustion system for fish feed drying around the required moisture removal, drying-air conditions and operating load…
CAH160 Burner System Components: Wiring and Gas Piping Close-Up
TL;DR: This close-up of CAH160 burner system components features one of six same-model systems being prepared for an aquafeed drying…
6 CAH160 Burner Systems for Aquafeed Drying: Denmark Project
TL;DR: HEATFLAM is preparing six CAH160 burner systems for an aquafeed drying project in Denmark. Engineers are wiring the systems…
HEATFLAM at IRGCE 2026: Industrial Combustion Solutions for Rubber Glove Manufacturing
TL;DR: HEATFLAM joined IRGCE 2026 at Booth 438A, Hall 4, to discuss industrial combustion solutions for rubber glove manufacturing. Our…
Industrial Dryer Burner Retrofit: Converting Steam Heating to Direct-Fired Gas Heating
TL;DR: An industrial dryer burner retrofit can replace steam coils with direct-fired gas heating when combustion products are acceptable in…
How to Choose the Right Ignition Electrode for an Industrial Burner
TL;DR: Choose an industrial burner ignition electrode by the burner maker’s specified insertion length, thread, ceramic insulation, rod construction, terminal…
Loading articles…
Articles could not load. Open the requested page.
Discuss Your Combustion Project
Share your application, fuel type, required capacity and operating conditions with our team.