A shipment of 15 HTDR industrial burners—covering HTDR200, HTDR300 and HTDR450 models—was prepared in Shanghai for delivery to Vietnam. The units are part of the Riello HTDR Series, supplied and supported by Heatflam for industrial process-heating projects.
Industrial equipment delivery is more than a logistics milestone. It is the visible result of product selection, technical communication and coordinated export preparation. In this shipment, Heatflam prepared 15 HTDR industrial burners for transport from Shanghai to Vietnam, covering three model designations: HTDR200, HTDR300 and HTDR450.
Riello describes HTDR as a process burner solution for industrial applications. For this project, the correct commercial description is therefore Riello HTDR Series, supplied and supported by Heatflam. The shipment footage below documents the real loading process rather than a staged product presentation.
Shipment Overview: 15 Units, Three HTDR Models
| Shipment detail | Confirmed information |
|---|---|
| Quantity | 15 units |
| Models | HTDR200, HTDR300 and HTDR450 |
| Origin | Shanghai, China |
| Destination | Vietnam |
| Product category | Industrial process burners |
The presence of three model sizes in one order also highlights an important project reality: industrial burner selection is duty-specific. Model names alone do not establish the correct firing rate, fuel arrangement, control scope or suitability for a particular furnace, kiln, dryer or other process-heating system. Those decisions require project data and technical review.
Watch the Industrial Burner Shipment to Vietnam
Real loading footage from the 15-unit Shanghai-to-Vietnam shipment.
For buyers evaluating an industrial burner shipment to Vietnam, this video provides useful evidence of physical preparation and loading. It does not replace the technical documentation required for equipment approval, installation or commissioning.
Where Industrial Process Burners Fit
The U.S. Department of Energy defines industrial process heating broadly as the use of thermal energy to produce, treat or alter manufactured goods. Its guidance explains that burners can provide an energy source whose heat is transferred to the material being processed. Fuel-fired systems may transfer combustion heat directly to the material or indirectly through a separating surface.
That system context matters when specifying industrial burners for process heating. The burner must be evaluated together with the combustion chamber, heat-transfer method, fuel supply, airflow, controls, operating sequence and site conditions. A credible industrial burner supplier should therefore request operating data before recommending a model or configuration.
Engineering note: The shipment confirms the model designations and quantity, but it does not by itself verify fuel type, rated output, turndown, emissions performance or certification scope. These items should be confirmed against the selected burner configuration and project documents.
HTDR200, HTDR300 and HTDR450: What Buyers Should Confirm
This order includes an HTDR200 burner, HTDR300 burner and HTDR450 burner within the overall 15-unit mix. No model-by-model quantity split or operating specification is stated here. Instead of selecting from the model number alone, buyers should provide a concise technical data set:
- Fuel: exact gas or liquid fuel composition, supply pressure and available conditions.
- Thermal duty: required heat output and normal operating range.
- Process: application, target process temperature and production operating pattern.
- Combustion space: furnace or chamber geometry, pressure conditions and available mounting arrangement.
- Control: modulation method, sequence requirements, signals and plant integration needs.
- Site: ambient conditions, utilities, applicable codes and documentation requirements.
If the enquiry is specifically for an industrial gas burner, the gas family and actual supply conditions should be identified rather than assumed. This makes it possible to evaluate the burner, valve train, controls and process interface as one combustion system.
Heatflam Support for Industrial Combustion Equipment in Vietnam
Heatflam supports industrial customers from product selection and technical communication through shipment coordination. For an industrial burner Vietnam project, that means translating process requirements into a reviewable equipment scope, coordinating the relevant product information and supporting international delivery.
The objective is practical: reduce ambiguity before equipment reaches site. Buyers can discuss burner selection, control expectations and system-integration needs through Heatflam’s industrial combustion solutions service. Final suitability remains subject to the technical requirements and approved project documentation.
A Delivery Milestone, Not the End of the Project
Loading the equipment closes one visible stage of the project. The next stages—site receipt, installation, interfaces, checks and commissioning preparation—depend on the agreed supply scope. Clear documentation and communication are especially important when industrial combustion equipment is delivered across borders.
For this 15-unit order, the footage records a concrete milestone: HTDR200, HTDR300 and HTDR450 equipment prepared in Shanghai and bound for Vietnam. It also reflects Heatflam’s role in connecting selected combustion equipment with the practical needs of an international industrial project.
Frequently Asked Questions
How many burners were included in the Vietnam shipment?
The shipment comprised 15 industrial burners in total.
Which HTDR models were shipped?
The shipment included HTDR200, HTDR300 and HTDR450 model designations. The quantity split between the three models is not stated.
Are HTDR burners manufactured by Heatflam?
No such claim is made. HTDR is identified as a Riello process burner solution; the equipment in this case was supplied and supported by Heatflam.
Are the shipped units confirmed as gas burners?
The shipment information available for this case does not confirm the fuel configuration. Fuel type and supply conditions should be checked in the approved project documents.
What information is needed for burner selection?
Provide fuel details, required heat output, process temperature, application, combustion-space and site conditions, control requirements and applicable documentation needs.
Planning Your Next Combustion Project?
Send Heatflam your fuel type, required heat output, process temperature, application, site conditions and control requirements for an engineering review.
sun@heatflam.com | +86 189 1708 6029 | heatflam.com
REFERENCES AND DATA SOURCES
- Riello, “Riello at AHR Expo 2026 in Las Vegas”, published February 11, 2026; accessed September 3, 2026.
- U.S. Department of Energy, “Process Heat Basics”, accessed September 3, 2026.
- U.S. Department of Energy, “What Are the Different Kinds of Process Heating Systems?”, accessed September 3, 2026.
- U.S. Department of Energy, “Improving Process Heating System Performance: A Sourcebook for Industry, Second Edition”, accessed September 3, 2026.